Jung binary input 6-way KNX REG 2116REG KNX

• Division units: 2
• Nominal voltage KNX: DC 21-32 V SELV
• Nominal voltage: AC/DC 10-230 V
• 6 inputs AC/DC 10-230 V ~
• Functions: switching, dimming, blinds up/down, brightness values, temperatures, calling up and saving light scenes

• Current consumption of KNX: max. 7.5 mA
• KNX connection: Connection terminal
• Ambient temperature: -5… +45°C
• Relative humidity: 93% (no condensation)
• Inputs
• Signal level “0” signal: AC/DC 0 ... 2 V
• Signal level “1” signal: AC/DC 7 ... 265 V
• Input current at nominal voltage
• Input current: approx. 0.7 mA
• Nominal frequency AC signal: 30 ... 60 Hz
• Signal duration pulse counter: min. 100 ms
• Cable length: max. 100 m
• Number of contacts per input:
- NO contacts: max. 50
- NC contacts: max. 50
• Power loss: max. 1 W
• Connection:
- Connection type: screw terminals
- Single wire: 1 x 0.5 ... 4 mm²
- Fine wire without ferrule: 1 x 0.5 ... 4 mm²
- Fine wire with ferrule: 1 x 0.5 ... 2.5 mm²
• Different external conductors can be connected per input group, e.g.: E1-3 = L1 and E4-E6 = L2
• Monitoring of conventional switch or button contacts, window contacts, etc. in KNX systems for reporting statuses, counter readings, operation of loads, etc.
• Status LED for each input
• Detection of voltage levels and changes at the input
• Input status sent to the bus
• Freely adjustable transmission behaviour
• Pulse and switch counter function
• Inputs can be disabled separately
• Connection of external alternating and direct voltages possible