For self-starters
who know what they want!
who know what they want!
0
WATCHLISTS
You must login before you can use the watchlist functions.
0
BASKET
You must login before you can use the basket functions.
 |
GIRA blind actuator 230V AC / 12-48V DC with manual actuation KNX REG
XXX.XX
€/unit
Description • Nominal voltage: 230 V AC, 50/60 Hz • Switching voltage DC: 12-48 V DC • Switching capacity: - DC 12/24 V: 6 A - DC 48 V: 3 A • Control of electric blinds, roller shutters, awnings, ventilation flaps or similar • KNX: connection and junction terminal • Load: screw terminals • Switching voltage AC: 230 V AC, 50/60 Hz • Switching capacity AC 230 V: 6 A / AC1 • Connection cross-section: max. 4 mm² • Integrated bus coupling • Manual actuation and status display for each output • Curtain position and slat position can be controlled directly • Behaviour on bus voltage failure and recovery can be configured • Separately configurable movement times with movement time extension for moving into the upper end position • Central control of all blind outputs possible • Feedback of the curtain position or slat position • Feedback can be delayed until after recovery of bus voltage • Assignments of up to five different safety functions (three wind alarms, one rain alarm, one frost alarm) or optionally with cyclical monitoring • Forced setting function can be set for each blind output • Integration into scenes is possible, a maximum of eight internal scenes can be configured per channel • Memory function for light scenes • Sun protection function with fixed and variable curtain or slat positions can be activated • Extended sun protection with extensive control functions • Integration into temperature management of building possible • Blocking of individual outputs by hand or bus • Active or passive (object can be read) cyclical feedback functions • Construction site operation: Outputs can be operated manually without bus voltage with operating voltage only • For mains voltage 230 V AC or small voltage 12 to 48 V DC • Connection of various external conductors • Independent control of the two blind outputs • Automatic curtain moving time detection for AC 230 V drives with mechanical stop position switches • Connection and junction terminal for KNX supplied • VDE approval in accordance with EN 60669-1, EN 60669-2-1 Technical data
|
More items in this category
