Hager heating actuator 6-way 24/230V KNX REG TYM646T

• Division units: 4
• Operating voltage via bus: 21-32 V DC
• Output voltage: 24-230 V AC
• For 24 V/230 V actuator

• Auxiliary voltage: 110-230V AC
• Frequency: 50/60 Hz
• Power consumption (operation): 1 W
• Power consumption (standby): 0.4 W
• Switching current: 5 / 160 mA
• Actuators 24 V: max. 2 per channel
• Actuators per channel: max. 4
• Operating temperature: -5°C to +45°C
• Conductor cross-section (flexible): 0.5-4 mm²
• Conductor cross-section (rigid): 0.5-4 mm²
• Width of rail mounted device (RMD): 4DU
• Dimensions (W x H x D): 72 x 90 x 65 mm
• Type of actuator can be set (normally closed/open)
• Programming button and red programming LED
• 6 manual operating buttons for open/close per actuator channel
• 6 red status LEDs for display of input statuses
• Short circuit proof and overload-safe (display by LED)
• With valve protection function
• Blocking function for each actuator output can be activated by manual control buttons or bus
• Feedback via bus, e.g. on overload, mains or sensor failure
• Various setpoint pre-settings for priority or emergency mode in the event of bus failure, adjustable for summer and winter time
• Integrated bus coupling
• Bus connection via terminals
• Screw terminals
• Actuators with the same operating voltage must be connected to all actuator channels