GIRA switch/blind actuator 6-/3-way 16A Standard GIRA One & KNX REG

• Nominal voltage:
• KNX: DC 21-32 V SELV
• Switching capacity: AC 250 V, 16 A / AC1
• Max. switching current: 800 A (200 µs), 165 A (20 ms)
• Combinations of switch and blind actuator are possible

• Current carrying capacity of adjacent outputs: total 20 A
• Connected load:
- Ohmic load: 3000 W
- Capacitive load: 16 A, max. 140 µF
- Motors (shutter or fan): 1380 W
- Incandescent lamps: 2300 W
- HV halogen: 2500 W
- HV LED bulbs: type 400 W
- Coiled transformer: 1200 VA
- Tronic transformer: 1500 W
• Fluorescent lamps:
- Uncompensated: 1000 VA
- Duo circuit: 2300 VA
- Parallel-compensated: 1160 VA
• Mercury vapour lamps:
- Uncompensated: 1000 W
- Parallel-compensated: 1160 W
• Connections:
- Gira One Medium: Twisted pair YCYM 2 x 2 x 0.8
- Test voltage: 4 kV (KNX/EIB bus cable)
- Gira One Bus: connection and junction terminal
- Load: Screw terminals (max. 4 mm² or 2 x 2.5 mm²)
• Current consumption:
- Gira One Bus: 4 to 18 mA
• Function as a switch actuator or blind actuator
• For the blind actuator function, two neighbouring relay outputs are combined to form one blind output
• Shading and ventilation function
• Connection and junction terminal supplied

• Function in the Gira One system:
- Switching of consumers or control of blind, roller shutter, awning, skylight operation
- In blind operation, two neighbouring outputs (A1/A2, A3/A4...) are combined to form one blind output
- Mixed operation for one actuator possible (e.g. A1 and A2 blind, A3 and A4 blind, A5 switching, A6 switching...)
- Manual operation of the outputs
- Programming and commissioning using the Gira Project Assistant (GPA) from Version 5.0 (available from 03/2023)
- Encrypted data transmission between the Gira One devices

• Function in the Gira KNX system:
- Blind and switching operation can be parameterised. - In blind operation, two neighbouring outputs (A1/A2, A3/A4...) are combined to form one blind output Mixed operation for one actuator possible (e.g. A1 and A2 blind, A3 and A4 blind, A5 switching, A6 switching...)
- Actively transmitting feedback or status messages can be delayed globally after a bus voltage recovery or ETS programming operation.
- Manual operation of the outputs independent of KNX with intelligent LED status displays for saving energy
- Advanced manual actuation: toggle between blind mode and switching mode before starting up the ETS
- Heartbeat function for monitoring the device, cyclical transmission 1 bit
- Bi-stable relay
- Supply from KNX bus, no additional power supply required
- Simplified terminal connection (no terminal overlapping)

• Notes:
- Can be updated via the Gira Project Assistant (GPA)
- KNX Data Secure compatible
- Fast application download (long frame support)
- Firmware updates are possible with the Gira ETS Service app (additional software)