Hager universal dimming actuator KNX REG

• Protection type: IP20
• Input voltage: 230 V AC
• LED indicator for overheating and overload protection
• Selector switch for manual/bus mode and load adjustment

• Operating voltage via bus: 21…32 V DC
• Auxiliary voltage: 230 V AC
• Current consumption of bus (data transfer): < 2.3 mA
• Frequency: 50/60 Hz
• Operating temperature: -5 ... 45°C
• Conductor cross-section (flexible): 0.75-2.5 mm²
• Conductor cross-section (rigid): 0.75-2.5 mm²
• Supply voltage: 30 V DC through bus + 230 V AC
• 230 V incandescent and halogen bulbs: 300 W per channel
• Dimmable LED bulbs: 60 W per channel
• Dimmable, conventional transformers: 300 VA per channel
• Dimmable energy saving bulbs: 60 W per channel
• Max. number of LED/ESL bulbs: 8 (15 for TYA663AN)
• Electronic transformers: 300 W per channel
• Status LED integrated into manual operating button
• Illuminated programming button
• Phase control or phase alignment, depending on load type, self-learning
• Minimum/maximum dimming values can be set for each channel on the device
• Integrated bus coupling
• Learning function for optimised operation oof compact fluorescent lamps and LED lights can be activated via bus
• Manual operation also possible without bus e.g. on building site
• Manual operation per channel via button with integrated LED status, KNX function locked at the same time
• Bulb-preserving soft switch-on
• Bus connection via terminals
• QuickConnect plug-in terminals
• Large label panel
• Do not connect conventional transformers with electronic transformers
• Additionally for 62 142 29:
- 1, 2 or 3-channel operation possible
- Load coupling of 3 channels to increase output power via parallel connection of the outputs