Gira G1 control with display 230 V KNX UP

• Protection type: IP21
• Power supply: AC 230 V, 50/60 Hz
• Multifunctional room control unit for visualisation and control of various building functions
• Range of functions depends on firmware

• Wi-Fi standard: IEEE 802.11b/g/n - 2.4 GHz
• Connection cable
• Ethernet specification: Cat.5e, Cat.6, Cat.6a, Cat.7
• Max. power consumption: 7 W
• Display: Type TFT, size 15.3 cm (6″)
• Number of colours: 16.7 M
• Resolution: 480 x 800 px (WVGA), 155 ppi
• Brightness: 350 cd/m²
• Contrast ratio: 1:500
• Viewing angle: > 80° all round
• Proximity sensor
• Range: max. 50 m
• Detection range: 30° horizontal, 30° vertical
• Installation depth: 32 mm
• Ambient temperature: 0 ... 45°C
• Use in KNX System and in Gira door intercom system or as client
• Precise details of scope of functions in the Gira online catalogue and technical device documentation
• Suitable for indoor use only
• Recommended fitting height: 150 cm from floor
• Fitting in deep device socket (electronic socket recommended for LAN connection)
• Communication for KNX installation is carried out exclusively via the KNXnet/IP standard
• To connect the Gira G1 PoE to the KNX installation, an IP router for KNX must be used
• From firmware version 3:
- To connect the Gira G1 230 V or G1 24 V to the KNX installation, a Gira IP router for KNX is required. The Gira IP router for KNX is specially equipped with the additional function “Reliable data communication” for this purpose
• Multiple Gira G1s can be operated on one Gira IP router for KNX
• Devices from index version I08 are prepared for KNX Secure (additional firmware update required)
• Commissioning in the KNX System for ETS 5.5 or higher
• Usable as a domestic station in conjunction with TKS-IP Gateway
• Please note the technical information about network planning in the device documentation when planning the system
• The Gira Project Assistant (GPA) is required for firmware updates (available free of charge in the Gira download area)
• To use a timer, either an internet connection to an NTP time server is required or a corresponding KNX time value transmitter (e.g. Gira weather station Plus 2074 00)
• In determining the dimensions of the power supply, it is essential to take account of the total power consumption of all connected consumers and the voltage drop across the cable network
• Delivery contents:
- Display module
- Frame holder
- Flush-mounted PoE LAN connection module

• Function in the Gira One system:
- Operation via a gesture-control-compatible multitouch display
- Connection and communication is via LAN or WLAN, depending on model
- Integrated loudspeaker
- Integrated microphone with echo compensation
- Gira G1 with flush-mounted 230 V Wi-Fi connection module
- Data communication via WLAN

• Function in the Gira KNX system:
- Operation via a gesture-control-compatible multitouch display
- KNX room control device
- Domestic station video
- Client for the following systems / servers - HomeServer – eNet– X1- Alarm Connect security system
- Integration of internet services