Jung presence detector Mini Standard Alpine white KNX 3361MWW

• Nominal voltage KNX: DC 21-32 V SELV
• Range: ø approx. 12 m (installation height 3 m)
• Control of lighting, room thermostats and other electrical loads indoors
• 3 PIR sensors
• Detection range 360°

• Current consumption KNX: max. 10 mA
• Bus connection: Connection terminal
• Protection class: III
• Ambient temperature: -25 to +55°C
• Relative Humidity: 10 ... 100 % (no condensation)
• Degree of protection: IP 44
• Ceiling cut-out (ø x D): 44 x 35 mm
• Dimensions (ø x H): 53.5 x 38 mm (with design ring)
• Max. Thickness of the suspended ceiling: approx. 25 mm
• Installation depth: min. 35 mm
• Distance between suspended ceiling and concrete ceiling: min. 20 mm
• Design ring ø inside: 35.6 mm
• Design ring ø outside: 53.5 mm
• Installation height of design ring: 1.8 mm
• Lens installation height: 5.5 mm
• Motion detection:
- Detection angle: 360°
• Brightness sensor:
- Measuring range: 10 ... 2,000 lx
- Accuracy (≤ 80 lx): ± 10 lx, ± 10 lx ± 5%
• Clamp mounting in suspended ceilings
• Ceiling mounting on fixed ceilings in device socket with dimensions according to DIN 49073 with flush-mounted device socket set (item designation: PMM-UP-SET-WW), surface mounting on fixed ceilings with flush-mounted device socket set (item designation: PMM-AP-SET-WW)
Product features:
• Integrated bus coupling unit
• Integrated brightness sensor
• Use as presence detector, Motion detector or for signalling operation
• Output functions: Switches, staircase lighting function, switching with forced position, value transmitter, light scene extension unit, operating mode specification for room temperature controller
• Extension of the detection range by operating several devices as main unit and extension unit
• Adjuster for manual correction of the sensitivity
• Status LED: Flashes when motion is detected; depending on programming, in normal operation or only during walking test operation

Presence detector function:
• Detection of the smallest movements, e.g. at a workstation to detect the presence of people
• Switch on: Motion detection and brightness threshold undershot
• Off-switch: No movement in the detection field and expiry of the run-on time, or brightness threshold exceeded

Motion detector function:
• Detection of movements for traffic route protection in buildings
• After triggering and switching on, motion detection works independently of brightness

signalling mode:
• Brightness-independent detection of movements in the detection field
• Switch on: After detecting an adjustable number of movements within the set monitoring period
• Off-switch: No movement in the detection field and expiry of the follow-up time