Thermo Proof Wood Mini spacer mounting system

- Application: Insulation from 50-120 mm
- Application: Especially also for soft insulating materials such as rock wool
- Stainless steel A4: For indoor and outdoor applications with direct weathering
- Variable connection options (M10 external thread, M6 internal thread or screws with ø 3-5 mm)
- No thermal bridge
- No pressure load on the façade

Contents:
- Hanger bolt M8 x 80 mm: 2 pcs.
- Iso spacer M6, ø 14 x 45 mm, T50: 2 pieces
- Adapter T25 M6/10: 2 pieces
- Barracuda expansion dowel 5 x 25 mm: 2 pieces
- Thermo Vario M10 x 40 mm for downpipe fastening: 2 pieces
- T50 bit: 1 piece

Processing and assembly
1: Shorten the threaded rod to the required length
2: Drill hole with ø14 mm in the building material (drill hole depth 90 mm + tWDVS)
3: Clean borehole
4: Screw the Barracuda 14/70 onto the threaded rod with max. two turns.
5: Hammer the pre-assembled Thermo Proof mini into the drill hole until the black insulating spacer is flush with the outer wall.
6 Finish screwing in until the collar of the Iso-Spacer is flush with the plaster.