Installation tester with charging pole adapter, full charge

Consisting of:
1 x Combi G3 electrical installation tester:
• For inspection of electrical installations
• Meets VDE 0100 & VDE 0105
• Touchscreen operation, all measurement functions at a glance
• Insulation measurement with 50, 100, 250, 500, 1000 V/DC test voltage
• Protective conductor continuity test with > 200 mA test current
• Determination of rotary field direction with only 1 probe
• Mains/loop impedance, Zpp, Zpn, Zpe with Ik display and 0.01 Ω resolution
• Complete FI (RCD) testing and analysis function model A, AC, B and EV
• RCD test with ascending test current (ramp test)
• Loop resistance measurement Ra without RCD release
• Voltage drop measurement
• Earthing measurement with the 2 and 3-conductor method
• Earth resistance measurement with the 4-conductor method
• Internal storage for 999 measurements
• Integrated visual interface on USB and Wi-Fi
• Dimensions (L x W x D): 235 x 165 x 75 mm
• Weight: 1250 g
• Delivery contents:
- Batteries: 6 x AA, rechargeable
- External charger
- Pen for touchscreen
- Topview software
- Software incl. Wi-Fi + cable
- 3-conductor earthed measurement cable
- Calibration certificate ISO 9000
- Carry case
• 4 measurement cables
• 4 crocodile clamps
• 4 probes in the colours green, blue, red and black

1 x test adapter EV-Test100:
• Simulation of charging statuses and for checking effectiveness of safety measures
• 1 and 3-phase test adapter with plug type 2 (length: 600 mm)
• Phase display with 3 LEDs for voltage monitoring
• Proximity Pilot (PP) rotary switch for simulation of different power load capacities for charger cables
• Control Pilot (CP) rotary switch for simulation of an e-vehicle
• Rotary switch for simulation of PE error and short circuit between CP and PE
• Check of communication between simulated e-vehicle and charging station

1 x PR400 test probe:
• START/STOP button allows measurement to be carried out or stopped without having to use the meter itself.
• Active for low impedance measurement, insulation measurement, RCD test, loop impedance measurement, rotary field direction measurement

• Consisting of:

1 x Combi G3 electrical installation tester:
• For inspection of electrical installations
• Meets VDE 0100 & VDE 0105
• Touchscreen operation, all measurement functions at a glance
• Insulation measurement with 50, 100, 250, 500, 1000 V/DC test voltage
• Protective conductor continuity test with > 200 mA test current
• Determination of rotary field direction with only 1 probe
• Mains/loop impedance, Zpp, Zpn, Zpe with Ik display and 0.01 Ω resolution
• Complete FI (RCD) testing and analysis function model A, AC, B and EV
• RCD test with ascending test current (ramp test)
• Measuring and displaying release current Ia, time ta and release voltage Ub
• Loop resistance measurement Ra without RCD release
• Voltage drop measurement
• Earthing measurement with the 2 and 3-conductor method
• Earth resistance measurement with the 4-conductor method
• Internal storage for 999 measurements
• Integrated visual interface on USB and Wi-Fi
• Dimensions (L x W x D): 235 x 165 x 75 mm
• Weight: 1250 g
• Delivery contents:
- Batteries: 6 x AA, rechargeable
- External charger
- Pen for touchscreen
- Topview software
- Software incl. Wi-Fi + cable
- 3-conductor earthed measurement cable
- Calibration certificate ISO 9000
- Carry case
• 4 measurement cables
• 4 crocodile clamps
• 4 probes in the colours green, blue, red and black

1 x test adapter EV-Test100:
• Simulation of charging statuses and for checking effectiveness of safety measures
• 1 and 3-phase test adapter with plug type 2 (length: 600 mm)
• Combination only possible with HT master models
• Universal 4mm sockets (banana plug)
• Phase display with 3 LEDs for voltage monitoring
• Proximity Pilot (PP) rotary switch for simulation of different power load capacities for charger cables
• Control Pilot (CP) rotary switch for simulation of an e-vehicle
• Rotary switch for simulation of PE error and short circuit between CP and PE
• Check of communication between simulated e-vehicle and charging station

1 x PR400 test probe:
• START/STOP button allows measurement to be carried out or stopped without having to use the meter itself.
• Active for low impedance measurement, insulation measurement, RCD test, loop impedance measurement, rotary field direction measurement