Solar flex pipe DN 16 drum with 450 m

The established flexible pipe system for innovative house technology.
• Stainless steel
• Material AISI316L, DIN 1.4404
• Nominal pressure PN at 20°C (bar): DN12 (21), DN16 (16), DN20 and DN25 (10)

Laying: Stainless steel flexible pipe is unrolled on site. Its shape can easily be bent and corrected. The minimum bending radius must be observed. Torsion must not be applied. Cutting: The flexible tube should not be cut too short. You will need at least one wave to create the sealing surfaces. It is best to use a pipe cutter and apply it to the wave trough. Cut at a right angle with little pressure, turning the cutting wheel slowly.

Suitable for QuickFix-Pro metallically sealing screw connections.

Technical data: DN12 DN16 DN20 DN25 DN32
Nominal pressure PN at 20°C (bar) 21 16 10 10 4
Bend radius min. static (mm) 20 25 30 35 40
Internal diameter (mm) 11.85 16.5 21 25.3 32.4
External diameter (mm) 15.85 21.35 26.6 31.7 39.9
Tolerance (mm) 0.2 0.2 0.2 0.3 0.3
Weight (g/m) 86 145 195 255 335
Heat carrier volume approx. (ml/m) 145 265 360 550 1100
Corresponding smooth pipe 12 x 1 15 x 1 18 x 1 22 x 1 28 x 1
Union nut DN15 (½”) DN20 (¾”) DN25 (1”) DN32 (1¼”) DN40 (1½”)
Locking screw part IT G
Parallel thread pursuant to ISO 228/1 – DN15 (½”) DN20 (¾”) DN25 (1”) DN32 (1¼”)
Locking screw part ET R
Conical thread pursuant to ISO 7/1 DN15 (½”) DN15 (½”) DN20 (¾”) DN25 (1”) DN32 (1¼”)