Dirty water immersion pump 230V - 9.5m³/h - 1 1/4"f - 10mm grainOrder no.: 93 092 96
XXX.XX
€/unit
immediately available Description • The electric single-stage submersible pumps with stainless steel housing have been specially designed For the extraction of waste water without faeces, in particular for emergency drainage and Shaft emptying also developed as a drainage water pump • Submersible pump in non-worm-free design with magnetic coupling between motor and impeller, model: E-ZWM 65 A Magnet • Use especially for: - Model: E-ZWM 65A for continuous operation - Circulation pump - Stream pump - Drainage pump • Pump housing: stainless steel • With float switch • Voltage: 230 V, 50 Hz • Pressure connection: DN 32 (1 1/4”) • Connection cable: 10 m • Pumps ø: 175 mm To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Manufacturer item no.: | 15225 |
Max. pressure [bar]: | 1,5 |
Nominal power max. [W]: | 850 |
Max. grain size [mm]: | 10,0 |
Type: | E-ZW 65 A |
Height [mm]: | 358 |
Capacity: | max. 9,500 l/h |
Pumping height: | max. 14,0 m |
Max. flow rate [l/h]: | 9500 |
Brand: | zehnder |
Core size max. [mm]: | 10 |
Material of the motor housing: | Stainless steel |
Material quality of the motor housing: | Stainless steel 316 L (1.4404) |
Pump housing material: | Fibre-reinforced plastic |
Material quality of the pump housing: | PP-GF |
Max. flow rate [l/h]: | 9,500 |
Max. Discharge head [m]: | 14 |
With cutting unit: | - |
Motor power consumed (P1) [W]: | 850 |
Motor output power (P2) [W]: | 430 |
Connection size: | 1 1/4 inch (32) |
Connection: | Internal thread |
Supply voltage:: | 1 x 230 V |
Frequency: | 50 Hz |
Nominal current [A]: | 3.7 |
Protection type (IP): | IP68 |
Electrical connection: | Connecting cord with plug |
Pump circuit: | With cast-on float |
Length of the connection cable [m]: | 10 |
Rpm [rpm]: | 2,800 |
Pump diameter [mm]: | 175 |
Pump height [mm]: | 360 |
Suitable for dry installation: | - |
Products |