E-manual welding inverter, 230 V single phase, model GYSMI 160 P

• Suitable for all common rutile and basic wrapped rod electrodes to be welded on direct current (steel, stainless steel, cast-iron etc.)
• Excellent weld penetration and arc stability
• ARC FORCE: Stabilises the arc by correcting the voltage if the electrode’s distance to the weld metal changes
• HOT START: Improves ignition properties by briefly increasing welding current. The arc ignites instantly in a reliable manner
• ANTI STICKING: Helps to reduce the tendency of the electrode to stick in the weld pool.
• TIG welding is possible:
- in combination with extension set (order no. 80 082 47)
- With TIG contact ignition

• Welding method: electrodes
• Cuts: no
• Current: 10-160 A
• Welding filler materials: electrodes ø 1.6-4.0 mm
• Wire coil: no
• Wire guide rolls: no
• Voltage (V): 230
• Control panel: potentiometer
• Duty cycle at 20°C: 60% at 85 A
• Suitable for generators (+/- 15%) max: 6.5 kW/7.5 kVA
• Protection type (IP): 21
• Dimensions L x W x H (mm): 270 x 110 x 170
• Weight (kg): 4.2
• Delivery contents:
- Carry case: no
- Earth clamp (1.6m/ø 16 mm²): yes
- Electrode holder (2m/ø 16 mm²): yes

• Additional delivery contents:
• Techno 11 LCD welding helmet
- Brightness level: 3
- Darkness level: 11
- Shutter speed (ms): 0.6
- Opening time: auto
- Field of view (mm): 98 x 35
- Power supply: solar
- Weight (g): 400
- Areas of application: Electrodes 10-150, TIG 10-175, MIG/MAG 10-200
- Standards: EN 175, EN 379