PV fireman's switch, 2MPP, 2E/1A, 2x44A, MC4-Evo2, SPD type I+II

Rooftop Photovoltaics systems require a disconnection device at the entry of the string lines into the building, which is connected to the Power supply in the building. This allows the fire brigade to carry out extinguishing work in an emergency without being unnecessarily endangered. When the Power supply is restored, the PV Next fire brigade switch automatically switches the PV strings back on.

• Suitable for remote disconnection of the DC side by the fire brigade in accordance with VDE-AR-E2100-712
• Approval in accordance with low-voltage switchgear and controlgear assemblies IEC 61439-1:2011 and EN 61439-2:2011
• Switching capacity of switch-disconnectors: IEC 60947-3, DC-PV1
• DC fireman's switch:
- Automatic switch-off at temperatures above 100°C
- Switching off due to undervoltage tripping
- Automatic reconnection after the control voltage (230 VAC) is applied again
- With signalling contact
- Connection of the 230 VAC fire switch control via cable glands (8-12 mm ø) max. conductor cross-section: 1.5 mm²
- Connection of the signal contact 24 VDC via cable glands (8-12 mm ø) max. conductor cross-section: 1.5 mm²
• Remote switch-off:
- Automatic restart after voltage drop: Yes
- Number of actuation cycles: 10,000
- Control voltage: 100 V AC - 250 V AC 50/60Hz
- Type of disconnection of the power circuit: Undervoltage tripping or manual switch actuation
- Switch-off time: 1.5 s
• Protection class: IP65
• Ambient temperature: -20 °C to +50 °C
• All installed in a glass-fibre reinforced plastic housing Observe the product information in the data sheet