2/2 way solenoid valve 3/4ö servo-controlled with 230 volt coilOrder no.: 95 024 91
XXX.XX
€/unit
immediately available Description • For use with neutral, gaseous and liquid media (air/water) • Normally closed (open on request) • The specified minimum pressure must always be present as the differential pressure for perfect functioning of the servo control • Installation position: any, preferably upright • Seal: NBR • Medium temperature: -10°C to +80°C • With magnetic coil and device plug • Voltage: 230 volts, 50 Hz • Protection type: IP65 • 100% ED-VDE0580 • Quick-closing • Made in Germany • Permissible pressure: 0.3 - 20 bar • Working with min. 0.3 pressure differential • Valve closed in rest position (NC). When current is applied, the solenoid opens the pilot hole and pressure builds up on top of the diaphragms. The higher pressure under the diaphragms then lifts them from the valve seat. The specified minimum pressure must always be present as the differential pressure. To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Manufacturer item no.: | G040.002344.090.009.090 |
Type: | G 040.002344 |
Size: | DN 20 (3/4") |
L x H [mm]: | 96 x 106 |
Cv value [m³/h]: | 11.0 |
Brand: | GSR® |
Housing material: | Brass |
Sealing material: | NBR (nitrile rubber) |
Connection 1: | Internal thread |
Connection 2: | Internal thread |
Connection size: | 3/4 inch (20) |
Max. medium temperature (continuous operation) [°C]: | 80 |
Min. medium temperature (continuous operation) [°C]: | -10 |
Max. Ambient temperature [°C]: | 35 |
Design: | Straight |
Indirectly actuated: | - |
Emergency manual operation: | None |
Supply voltage [V]: | 230 |
Frequency of the input voltage [Hz]: | 0 - 50 |
Duty cycle: | 100 % |
Protection type (IP): | IP65 |
Kvs value: | 11 |
Products |