Hager universal dimming actuator KNX REG

• Protection type: IP20
• Input voltage: 230 V AC
• LED indicator for overheating and overload protection
• Selector switch for manual/bus mode and load adjustment

• Operating voltage via bus: 21...32 V DC
• Auxiliary voltage: 230 V AC
• Bus current consumption (data transfer): < 2.3 mA
• Frequency: 50/60 Hz
• Operating temperature: -5 ... 45°C
• Conductor cross-section (flexible): 0.75-2.5 mm²
• Conductor cross-section (rigid): 0.75-2.5 mm²
• Supply voltage: 30 V DC through bus + 230 V AC
• 230 V incandescent and Halogen lamps: 300 W per Ducts
• Dimmable LED lamps: 60 W per channel
• Dimmable, conventional transformers: 300 VA per Ducts
• Dimmable energy-saving lamps: 60 W per Ducts
• Max. Max. number of LED/ESL lamps: 8 (15 with TYA663AN)
• Electronic transformers: 300 W per Ducts
• Status LED integrated in manual control button
• Lighting programming button
• Phase cut-on or phase cut-off depending on load type, self-learning
• Minimum/maximum dimming values per Ducts can be set on the device
• Integrated bus coupling unit
• Learning function for optimised operation of Compact fluorescent lamps and LED Lights can be activated via bus
• Manual operation also possible without bus, e.g. on construction sites
• Manual operation per Ducts via Button with integrated status LED, disabling of the KNX function
• Lamp-protecting soft start
• Bus connection via connection terminals
• QuickConnect plug-in terminals
• Large labelling field
• Do not connect conventional transformers together with electronic transformers
• Additionally for 62 142 29:
- 1-, 2- or 3-channel operation possible
- Load coupling of 3 Ducts to increase the output power by connecting the outputs in parallel