Universal rotary dimmer, flush-mounted

• For cut-out/two-way connection
• With pushbutton shut off/toggle switch and rotary operation
• Soft-start
• Fully automatic load detection (R, L, C), hence optimised matching to leading or trailing phase-angle dimming type
• Rated load:
- LED lamps: 3-225 W
- Incandescent lamps, high/low-voltage halogen lamps with electronic transformer: 3-250 W
• Suitable for phase angle/reverse phase
• Overheat and overload protection integrated
• Short circuit protection with automatic fuse
• Extra thin design (24 mm)
• Incl. Adapter set compatible with most covers
• Claws and screw fastening

Additional benefits:
• Automatically sets optimal operating point on the characteristic curve (as did the predecessor). Minimum brightness is manually adjustable
• Automatically corrects waveform to avoid pulses
• Automatically minimises insertion loss below 1%, i.e. dynamic reduction of voltage drop at the dimmer
• Dimming range can be extended up and down with Deep Dimming Compensation
• Silent dimming
• Dimming curve matched to the brightness sensitivity of human eyes over entire range and particularly in the lower range