Jung presence detector Mini Standard Alpine white KNX 3361MWW

• Nominal voltage KNX: DC 21-32 V SELV
• Range: ø approx. 12 m (installation height 3 m)
• Control of lighting, room thermostats and other electrical loads indoors
• 3 PIR sensors
• Detection range 360°

• Current consumption of KNX: max. 10 mA
• Bus connection: Connection terminal
• Protection class: III
• Ambient temperature: -25 to +55°C
• Relative humidity: 10 ... 100% (no condensation)
• Protection rating: IP 44
• Ceiling cut-out (ø x D): 44 x 35 mm
• Dimensions: (ø x H): 53.5 x 38 mm (with design ring)
• Max. thickness of suspended ceiling: approx. 25 mm
• Installation depth: min. 35 mm
• Spacing between suspended ceiling and concrete ceiling: min. 20 mm
• Design ring inner ø: 35.6 mm
• Design ring outer ø: 53.5 mm
• Installation height of design ring: 1.8 mm
• Installation height of lens: 5.5 mm
• Motion detection:
- Angle of coverage: 360°
• Brightness sensor:
- Measurement range: 10 ... 2,000 lx
- Accuracy (≤ 80 lx): ± 10 lx, ± 10 lx ± 5%
• Clamp fitting to suspended ceilings
• Ceiling mounting on solid ceilings in device box with dimensions in accordance with DIN 49073 with flush-mounting kit (art. designation: PMM-UP-SET-WW), surface fitting to solid ceilings with surface-mounting kit (art. designation: PMM-AP-SET-WW)
Product features:
• Integrated bus coupling
• Integrated brightness sensor
• Use as presence detector, motion detector and for alarm systems
• Output functions: switching, staircase function, switching with forced setting, value transmitter, light scene extension unit, operating mode specification for room temperature controller
• Extension of detection range by operating multiple devices as main and extension units
• Adjuster for manual setting of sensitivity
• Status LED: flashes on motion detection; depending on programming, in normal operation or only in walking test mode

Presence detector function:
• Detection of the smallest movements, e.g. at a workstation to detect the presence of a person
• Switch-on: motion detection and brightness threshold not reached
• Switch-off: No movement in detection area and overrun time elapsed, or brightness threshold exceeded

Motion detector function:
• Detection of movements to maintain traffic safety in buildings
• Once triggered and switched on, motion detection operates irrespective of brightness

Alarm mode:
• Detection of movements in the detection area irrespective of brightness
• Switch-on: After detection of an adjustable number of movements within the set monitoring period
• Switch-off: No movement in detection area and overrun time elapsed