Hager universal dimming actuator 1-way 600W ESL/LED KNX REG TYA661BN

• Input voltage: 230 V AC
• Overheating/overload protection, display via LED
• Additionally for 62 142 49:
- Load coupling of 4 channels to increase output power via parallel connection of the outputs
- Manual operation per channel via button with integrated LED status, KNX function blocked at the same time

• Operating voltage via bus: 21-32 V DC
• Auxiliary voltage: 230 V AC
• Current consumption of bus (data transfer)
- < 2.3 mA with TYA661BN
- < 2.4 mA with TYA664BN
• Frequency: 50/60 Hz
• Operating temperature: -5 ... 45°C
• Conductor cross-section (flexible): 0.75-2.5 mm²
• Conductor cross-section (rigid): 0.75-2.5 mm²
• Supply voltage: 30 V DC through bus + 230 V AC
• 230 V incandescent and halogen bulbs: 600 W per channel
• Dimmable LED bulbs: 120 W per channel
• Dimmable, conventional transformers: 600 VA per channel
• Dimmable energy-saving lamps: 120 W per channel
• Max. number of LED/ESL bulbs: 10
• Electronic transformers: 600 W per channel
• Status LED integrated into manual operating button
• Illuminated programming button
• Phase control or phase alignment, depending on load type, self-learning
• Minimum/maximum dimming values can be set for each channel on the device
• Learning function for optimised operation oof compact fluorescent lamps and LED lights can be activated via bus
• Manual operation can be activated via selector switch with deactivation of the KNX function
• Selector switch for manual/bus mode and load adjustment
• Bulb-preserving soft switch-on
• Large label panel
• Integrated bus coupling
• Bus connection via terminals
• With QuickConnect plug-in terminals
• Do not connect conventional transformers with electronic transformers