• Only for one tapping point
• Under-table installation
• Plastic inner container
• Frost protection (not on Basis model)
| Model Huz 5 ÖKO |
Basic |
Comfort |
DropStop |
| Technical data |
|
|
|
| Energy efficiency class |
A*) |
A*) |
A*) |
| Contents [l] |
5 |
5 |
5 |
| • Water pipe connections |
DN 10 (3/8") |
DN 10 (3/8") |
DN 10 (3/8") |
| For one tapping point (open device) |
• |
• |
• |
| For one or more tapping points (closed device) |
- |
- |
- |
| Mixed water volume of 40°C 1) [l] |
10 |
10 |
10 |
| Voltage [V] |
1/N/PE~230 50 Hz |
1/N/PE~230 50 Hz |
1/N/PE~230 50 Hz |
| Connected load [kW] |
2 |
2 |
2 |
| Consumption of standby current 2) [kWh/24 h] |
0.27 |
0.23 |
0.20 |
| Minimum required fuse rating [A] |
10 |
10 |
10 |
| With Euro plug (S) |
• |
• |
• |
| ThermoStop |
- |
• |
• |
| DropStop |
- |
- |
• |
| Temperature selection [approx. °C] |
35-85 |
35-85 |
35-85 |
| Temp. Selection toggle can be limited to °C |
- |
•/45/55/65 |
•/45/55/65 |
| 2 Energy saving settings: “E” at 40°C, “e” 60°C |
• |
• |
• |
| Temperature selection limitation to 45°C, 55°C, 65°C |
- |
• |
• |
| Frost protection position |
- |
• |
• |
| Container/radiator material |
Plastic/copper |
Plastic/copper |
Plastic/copper |
| Temperature fuse, can be switched on again |
•/• |
•/• |
•/• |
| Humidity protection level according to VDE |
IP 24 |
IP 24 D |
IP 24 D |
| Weight with water filling [kg] |
8.2 |
8.2 |
8.5 |
| Free of circuit feedback/suppressed (VDE/F) |
•/• |
•/• |
•/• |
| Connection dimensions |
|
|
|
| Height with water connection port [cm] |
41.5 |
44.3 |
43.6 |
| Width [cm] |
25.2 |
26.3 |
26.3 |
| Depth [cm] |
21.5 |
23.0 |
23.1 |
*) The information complies with the requirements for the EU Ordinance 812/2013, mandatory as of September 2015
1) The fixed water volume 40°C usage temperature occurs by mixing cold water with 65°C tank water based on the ready state.
2) The standby power consumption specifies the amount of energy that is required in 24 hours to keep the tank temperature at 65°C (without removing warm water). Standby power consumption is a gauge for tank quality.
