GIRA blind actuator 8-way 230V AC / 12-48V DC with manual actuation KNX REG

• Nominal voltage: 230 V AC, 50/60 Hz
• Switching voltage DC: 12-48 V DC
• Switching capacity:
- DC 12/24 V: 6 A
- DC 48 V: 3 A
• Control of electric blinds, roller shutters, awnings, ventilation flaps or similar

• KNX: connection and junction terminal
• Load: screw terminals
• Switching voltage AC: 230 V AC, 50/60 Hz
• Switching capacity AC 230 V: 6 A / AC1
• Connection cross-section: max. 4 mm²
• Integrated bus coupling
• Manual actuation and status display for each output
• Curtain position and slat position can be controlled directly
• Behaviour on bus voltage failure and recovery can be configured
• Separately configurable movement times with movement time extension for moving into the upper end position
• Central control of all blind outputs possible
• Feedback of the curtain position or slat position
• Feedback can be delayed until after recovery of bus voltage
• Assignments of up to five different safety functions (three wind alarms, one rain alarm, one frost alarm) or optionally with cyclical monitoring
• Forced setting function can be set for each blind output
• Integration into scenes is possible, a maximum of eight internal scenes can be configured per channel
• Memory function for light scenes
• Sun protection function with fixed and variable curtain or slat positions can be activated
• Extended sun protection with extensive control functions
• Integration into temperature management of building possible
• Blocking of individual outputs by hand or bus
• Active or passive (object can be read) cyclical feedback functions
• Construction site operation: Outputs can be operated manually without bus voltage with operating voltage only
• For mains voltage 230 V AC or small voltage 12 to 48 V DC
• Connection of various external conductors
• Independent control of the two blind outputs
• Automatic curtain moving time detection for AC 230 V drives with mechanical stop position switches
• Connection and junction terminal for KNX supplied
• VDE approval in accordance with EN 60669-1, EN 60669-2-1